860021 4 FUNCTION DECODER WITH 8 PIN HARNESS

860021 8 pin harnessed decoder Interface:

NEM652 8pin plug. Purple wire for FO2.

For detailed information please refer to the manuals. http://laisdcc.com/LaisDcc_Decoders_Manual_V2.pdf Rating:

1A continuous, 2A peak

Scale: HO & N scale

Functions: 4 at 100mA each

Standard: NMRA DCC

Not Support: ABC, Railcom, Motorola, or High power stay alives.

Brand: LaisDcc

Total support of all NMRA/NEM specifications

Super smooth high frequency silent drive motor control.

Switchable DC running 4 digit addressing and 14, 28 or 128 speed steps.

4 active functions each safe to 100mA

Support for all common programming & consist modes.

Back EMF with step-variable or Fn button control.

Fully adjustable motor control and function actions.

Easily locked once adjustment or set-up is complete.

All special lighting effects available

All functions able to be re-allocated (remapped) as required.

Heat-shrink insulated for short-free installation.

Economical enough to use as lighting decoders.

2Amp peak power, 1A continuous,

Functions 100mA

Reset by CV8=4 or CV30=4

LaisDcc motor decoders can be also used as function decoders. You just need to connect a 560ohm/0.25W resistor between the grey wire and the orange wire to make it to a dummy load/motor. Then you can use it as a function only decoder and you can change the mapping and light effects after the installation. You do not need to take it out to connect to a motor to do the CV settings.